Mic Adapters for the iP-2

iP-2 Mic Adapters ensure optimum performance with a variety of microphones. A small PCB is installed in a miniature 3.5mm Stereo Jack Plug. The cable from the mic is connected to the PCB as indicated. As well as setting the optimum operating current for the mic capsule, Highlander's Mic Adapters help with the proximity effect by rolling off low end to reduce "boominess".

We can supply adapters for the following microphones:
  •  Joe Mills
  •  AKG 416B
  •  Audio Technica Pro95
For microphones that are not listed contact Highlander.