Home Page
Internal Mic
for the IP-2
Miniature State of the Art, Electret Condenser.
Pickup Pattern: Omni
Frequency Response: 20Hz - 22KHz
Sensitivity: -43dB
Signal to Noise Ratio: >62dB
Dimensions of Housing: 0.34" (8.65mm) Dia x
0.5" (12.7mm) Long
The capsule is suspended in its housing using a unique rubber mounting system. This helps to isolate the capsule from unwanted vibration and mechanical shock, resulting in a clearer sound that is free from "thumps" even when the guitar is slapped.
Clip and Preamplifier
Preamplifier Specs
Noise: -97dB (Ref -10dB)
IM Distortion: More than 20dB below the threshold of hearing

Freq. Response: Flat to 450KHz
When combined with the capsule, the Low End response will vary depending on the size of the guitar and the microphone position. It will extend down to between 15Hz-35Hz
Larger bodies typically cut off at lower frequencies.
Placing the mic towards the smaller part of the body should decrease low end.

Power: 9V @ 375uA (including capsule)
Battery Life:
Combined with the IP-2: > 600 Hours

The clip is used to attach the microphone to the back brace of an Acoustic Guitar. It also houses a new preamplifier, custom designed by Highlander to achieve maximum peformance from the mic capsule when used inside of an Acoustic Guitar. The surfaces of the clip that come into contact with the back brace have a layer of cork attached. This helps the clip to stay in place and protects the brace from any damage.
Dimensions: 1.45" (37mm) Long x 1.2" (30.5mm) High
The miniature professional gooseneck is just under 3/16" (4.75mm) diameter by 4" (102mm) long. It combines great flexibility with the ability to hold its shape and position. This gooseneck makes it easy to fine tune mic placement after installation.
Catalog Distributors Installation FAQ Links

E-mail Highlander [email protected]
USA and Canada Call Toll Free 1.888.658.1819
Otherwise Call 1.805.547.1410
FAX: 1.805.547.1228
870 Capitolio Way, Unit 3, San Luis Obispo, CA 93401